DSO150 Fully Assembled Digital Oscilloscope with Housing Case - (AD53165)

Description:

This kit includes your own fully designed and fully functional digital oscilloscope. Once up and running, the oscilloscope will deliver up to 1M samples/second, 12-bit resolution, a maximum input voltage of up to 50 Vpp, and more.

This kit includes a PCB, with all surface-mount components already soldered for you. A 9V power supply is required to power the oscilloscope; the 9V power supply is not included.

This digital oscilloscope kit adopts the ARM Cortex-M3 processor and has a 2.4-inch TFT display and a protective case. It is easy and reliable for circuit operation. It can display waveform parameters such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak values.

Characteristics:

- Adopts ARM Cortex-M3 processor (STM32F103C8) and includes a 2.4-inch color TFT display.

- Used for secondary development based on this kit, for example, it can be switched to millivolts.

- Comes with instructions, easy to install and operate.

- With auto/normal/single shot modes, it's easy to capture the waveform of the moment.

- Rising or falling edge trigger available.

- Previous waveform observable before triggering (negative delay).

- You can freeze the waveform display at any time (HOLD function).

- With digital display of waveform parameters, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.

- Waveform storage function: will not lose the waveform after power off.

- Short circuit and open circuit detection: can help user to find out the soldering error.

- TFT controller recognition function.

- Maximum real-time sampling rate: 1 MSa/s

- Analog bandwidth: 0-200 KHz

- Sensitivity range: 5mV/div-20mV/idv

- Maximum input voltage: 50 Vpk (1X probe)

- Input impedance: 1 M ohms / 20 pF

- Precision: 12 bits

- Record length: 1024 points

- Coupling modes: DC / AC / GND

- Time base range: 500 s/Div - 10us/Div

- Shooting modes: automatic, normal and single

- Trigger position: center of buffer

- Supply voltage: DC 9V (8-10V)

- Current consumption: ~ 120 mA at 9 V

- Screen size: 2*1.57in

Package Included:

• 1x Fully Assembled Digital Oscilloscope Kit
• 1x Probe
• 1x Protective box

Data sheet