{"product_id":"ad60968","title":"Raspberry Pi Pico [DEV-17829] - (AD60968)","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It features the RP2040, marking Raspberry Pi's first in-house designed microcontroller. Pico provides a minimal (but flexible) external circuit to support the RP2040 chip (Flash, crystal, power supplies and decoupling, and USB connector). Most of the RP2040 microcontroller pins are brought out to the user IO pins on the left and right edges of the board. Four RP2040 IOs are used for internal functions: driving an LED, switched mode power supply (SMPS) power control, and sensing the system voltages.\u003c\/p\u003e\n\u003cp\u003ePico uses an on-board buck-boost SMPS which can generate the 3.3 volts needed (to power the RP2040 and external circuitry) from a wide range of input voltages (~1.8 to 5.5V). This allows for significant flexibility to power the unit from various sources, such as a single LiPo cell or 3 AA cells in series. Battery chargers can also be very easily integrated with the Pico power chain. Reprogramming the Pico's flash memory can be done via USB (simply drag and drop a file onto the Pico which shows up as a mass storage device) or via the Serial Wire Debug (SWD) port. The SWD port can also be used to interactively debug code execution on the RP2040.\u003c\/p\u003e\n\u003cp\u003ePico has been designed to use 0.1\" soldered pin headers (it has a wider 0.1\" pitch than a standard 40-pin DIP package) or can be used as a surface mount \"module\" as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow soldered SMT module.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eRP2040 microcontroller designed by Raspberry Pi in the UK.\u003c\/li\u003e\n\n\u003cli\u003eDual-core ARM Cortex M0+ processor, flexible clock up to 133 MHz.\u003c\/li\u003e\n\n\u003cli\u003e264 kB of SRAM, and 2 MB of on-board Flash memory.\u003c\/li\u003e\n\n\u003cli\u003eCastellated module allows soldering directly to carrier boards.\u003c\/li\u003e\n\n\u003cli\u003eUSB 1.1 Host and Device support.\u003c\/li\u003e\n\n\u003cli\u003eLow-power sleep and dormant modes.\u003c\/li\u003e\n\n\u003cli\u003eDrag-and-drop programming using mass storage over USB.\u003c\/li\u003e\n\n\u003cli\u003e26 × multi-function GPIO pins.\u003c\/li\u003e\n\n\u003cli\u003e2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.\u003c\/li\u003e\n\n\u003cli\u003eAccurate on-chip clock and timer.\u003c\/li\u003e\n\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\n\u003cli\u003eAccelerated floating-point libraries on-chip.\u003c\/li\u003e\n\n\u003cli\u003e8 × Programmable I\/O (PIO) state machines for custom peripheral support.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"http:\/\/www.raspberrypi.org\/documentation\/pico\/getting-started\"\u003eGetting Started Guide\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/rp2040\"\u003eRP2040 Informational Page\u003c\/a\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/raspberry-pi-pico.html\" target=\"_blank\" title=\"Enlace de referencia\" rel=\"noopener\"\u003e\u003cstrong\u003eReference Link\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"MicroJPM","offers":[{"title":"Default Title","offer_id":48427435655268,"sku":"AD60968","price":17.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1344\/4452\/files\/AD60968uJPM.jpg?v=1779086652","url":"https:\/\/www.microjpm.store\/en\/products\/ad60968","provider":"MicroJPM","version":"1.0","type":"link"}